||The Rental Show Exhibitor products, Construction/General Tool/Software
This month, Rental Management looks at a variety of selected products from some of the more than 675 companies scheduled to exhibit at The Rental Show 2014 in Orlando, Fla.
|Magnum Power Products solar light tower
Booth No. 4335
The solar hybrid light tower from Magnum Power Products, Berlin, Wis., uses solar and propane power to assure operation. The tri-panel solar system collects 780W of solar energy to power the four 110W LED light fixtures. Liquid propane backs up the solar system, powered by a Generac air-cooled LPG engine with two on-board propane tanks. Each LED light has a life expectancy of 50,000 hours and each is individually replaceable.
||Atlas Copco Construction Equipment compressor
Booth No. 5335
The XAS 185 Eco portable compressor from Atlas Copco Construction Equipment, Commerce City, Colo., provides 185 cfm for pneumatic tools and for high free air delivery applications such as sandblasting. The XAS 185 is powered by a 49-hp John Deere engine that is EPA- and CARB-compliant and certified for Tier 4i. All controls are located on a single panel at waist level and a stepless, fully automatic regulator constantly varies the engine speed according to air demand, reducing fuel consumption.
|Orion Software application
The Sirius e rental, distribution and service application from Orion Software, Montreal, combines a Windows application and web portal with mobility through the cloud. The company says clients can use the rental software as a full shopping cart for the general public or by offering it to specific customers, or as a portal for customers to view their transactions. Sirius e also was designed to be used on a touch screen at the point of sale and in the field, and is deployed the same whether users access it from a computer or a mobile device.
|| Diteq Corp. core drill
Booth No. 3656
The Shibuya TS-252ABV core drill with combo base and vacuum pump from Diteq Corp., Lee’s Summit, Mo., has a 12-in. bit capacity and a 20 amp, two-speed, low-noise motor. The drill has wheels for mobility at the job site and a standard vacuum pump mounted on the base.
|JLG Industries scissor series
Booth No. 4119; 877-554-5438; jlg.com
The 1932RS and 3284RS scissor lifts from JLG Industries, McConnellsburg, Pa., offer platform heights of 19 ft. and 32 ft., and capacities of 500 lbs. and 705 lbs., respectively. Both lifts have direct electric drive motors, passive pothole protection and the ability to traverse grades of up to 25 percent. The machines also have a multifunction
digital indicator designed to simplify battery evaluation and fault diagnosis, the company says.
||NoRamp Trailers trailer line
Booth No. 5585
The trailer line from NoRamp Trailers, Elkhart, Ind., includes four lighter weight models for use with SUVs, minivans and light pickups. The trailers have a ground-level loading design and the ability to load and unload equipment with or without a tow vehicle being attached. LED lighting is included, with a winch receiver, adjustable coupler, safety locking mechanism, full-length torsion axle and electric brakes on all wheels with optional surge brakes available.
|Club Car utility vehicle
Booth No. 4381
The XRT1550 SE utility vehicle from Club Car, Augusta, Ga., features the company’s IntelliTrak™ all-wheel-drive system that senses the ground it is on and shifts automatically. The vehicle seats four, has a total vehicle capacity of 1,600 lbs. and is powered by a commercial-grade diesel motor.
||Hy-Brid Lifts by Custom Equipment scissor lift
Booth No. 4330
The Hy-Brid HB-1030 low-level scissor lift from Hy-Brid Lifts by Custom Equipment, Richfield, Wis., has 750 lbs. of platform capacity and is designed to handle multiple applications up to working heights of 16 ft. The platforms are 25 in. wide by 60 in. long and have 30-in. slide-out extensions for additional working space. The extensions have capacities of 250 lbs.
|Pramac America light tower
The LSW 6K light tower from Pramac America, Marietta, Ga., has a Kohler KDW 1003 engine with low oil pressure and high engine temperature shutdown. The four 1,000W metal halide lamps have an illumination capacity of 404,000 lumens and the 32-gal. fuel capacity can provide 66 hours of run time. The three-stage telescopic mast has a 30-ft. elevation and can be rotated 350 degrees from the ground.
||Subaru Industrial Power Products big block engines
Booth No. 3973
The 35-hp EH90 and 40-hp EH99 big block V-Twin engines from Subaru Industrial Power Products, Lake Zurich, Ill., are designed for use in equipment such as concrete polishers, riding trowels, utility vehicles, zero-turn mowers and ride-on blowers. The four-cycle overhead valve gasoline engines have a dual element air filter to protect the engines from dust and a low oil pressure sensor allows equipment manufacturers to offer control panel alerts or automatic engine shutoff. The engines also comply with current EPA and CARB requirements.
|LBX Co. excavator
Booth No. 5375
The Link-Belt 145 X3 spin ace minimum swing radius excavator from LBX Co., Lexington, Ky., is equipped with an advanced, electronically controlled Isuzu diesel engine EPA certified to Tier 4i standards. The company says technological advancements in engine electronics and enhancements to the hydraulic system have helped reduce fuel consumption by up to
||Jenny Products electric compressors
Booth No. 2956
The K-series electric wheeled portable compressors from Jenny Products, Somerset, Pa., feature the company’s “K” heavy-duty, single-stage cast iron compressor pump. The series includes 1-, 1.5- and 2-hp models and four basic air tank configurations with 8, 15, 17 and
30 gal. The compressors operate on 115V or 230V single-phase power and deliver as much as 8.4 cfm at 100 psi, the company says.
|Sure Flame heater
Booth No. 2571
The IX410 indirect industrial heater from Sure Flame Products, Lethbridge, Alberta, Canada, has four safety shutdown controls, a high limit switch, an exhaust limit switch, an air switch and flame rod. The company says the heater is designed to operate in extreme conditions with a stainless-steel heat exchanger, lifting hook and forklift pockets. The heater operates
on natural gas or propane with the switch of a single level, has an adjustable handle and 16-in. puncture-proof wheels.
||Kaeser Compressors portable compressor
Booth No. 4312
The M57 Mobilair™ portable compressor from Kaeser Compressors, Fredericksburg, Va., is powered by a heavy-duty, four-cylinder 49-hp diesel engine with a cold-start battery. The compressor delivers 210 cfm at 100 psig and is designed to provide more than
10 hours of uninterrupted operation.
|Takeuchi Manufacturing (U.S.) track loaders
Booth No. 5758
The TL10 and TL12 track loaders from Takeuchi Manufacturing (U.S.), Pendergrass, Ga., have Tier 4i compliant engines and an “Eco Mode” function designed to reduce fuel consumption during operation. The TL10 has an operating weight of 10,318 lbs., a tip load of 6,867 lbs. and an operating capacity of 2,403 lbs. The TL12 has an operating weight of 11,618 lbs. and a tip load of 8,102 lbs. Both loaders have a variable flow auxiliary hydraulic system with three settings that can be programmed to match the flow requirements of various attachments.
||Oxford Plastics USA barrier
Booth No. 3978
The ClearPath Avalon Barrier from Oxford Plastics USA, East Proivdence, R.I., has a HiVi clearpath foot and lockable connector, and can be used for indoor and outdoor events, construction, street traffic and other uses. The linking system is designed to create secure joints on uneven ground, over curbs, up slopes and across rough terrain. Advertising signage and reflective materials can be affixed to the front and back. The unit is designed for secure stacking and easy transportation, the company says.
Booth No. 5362
The line of vibratory tampers from BOMAG Light Equipment Div., Kewanee, Ill., includes several models designed for applications such as trench construction, utility and cable backfill compaction, landscaping and small repair jobs. The 128-lb. BT60 delivers up to 3,272 lbs. of impact force, the 150-lb. BT65 produces 3,822 lbs. of impact force and the 143-lb. BVT65 delivers 2,597 lbs. of impact force. Each model is powered by a four-cycle Honda engine with recoil starter and has a maximum speed of 66 ft. per minute.
||Terex Construction excavator
Booth No. 4717
The TC37 zero tail swing compact crawler excavator from Terex® Construction, Southaven, Miss., has a bucket capacity of 1.4 to 4.6 cu. ft., a maximum digging depth of 11 ft. 1 in. and a reach of 18 ft. 6 in. The excavator is designed to turn 360 degrees within the width of its tracks so that it can work in confined and restricted areas, the company says. The 32.5-hp machine is powered by a Mistubishi four-cylinder diesel engine and hydrostatic drive.
|Makinex jackhammer trolley
Booth No. 3753
+61 2 9460 8071; makinex.com.au
The jackhammer trolley from Makinex, Artarmon, New South Wales, Australia, is designed for the removal of floor tiles, adhesive residue, vinyl and cork from concrete and wooden surfaces. The company says the trolley carries the majority of the weight of the jackhammer to relieve pressure and strain for the operator.
||Snorkel rough-terrain lift
Booth No. 4987
The S3970RT 39-ft. compact rough-terrain lift from Snorkel, Elwood, Kan., is designed for working in confined spaces, such as in between buildings. Power options include a Kubota diesel engine, a gasoline, LPG, bi-energy and a gasoline/LPG combination. The machine also includes forklift pockets for transport and a slide-out service tray for access to the engine.
|EDCO — Equipment Development Co. floor grinders
Booth No. 3346
The concrete floor grinders from EDCO — Equipment Development Co., Frederick, Md., have a leveling system that adjusts the machine’s height for different accessories and purposes, so that the accessories make full contact with floor surfaces. The company says the design eliminates the need for accessory-holding wooden wedges. The grinders also have VELCRO® dust shrouds surrounding a rounded gearbox to collect dust and allow grinding closer to walls, the company says.
||Campo Equipment heater
Booth No. 2759
The Blaze 2000 D/G indirect-fired heater from Campo Equipment, Brampton, Ontario, Canada, runs on single- or three-phase power without any modification. It has three fan speeds to control heat rise and cfm, and a high and low fire burner to respectively produce 2 million Btu or 1 million Btu. The 2,950-lb. heater is designed to fit through a standard doorway and comes with fork pockets on all sides and lifting eye hooks.
|Broce Manufacturing Co. broom
Booth No. 6158
The 350 series self-propelled road broom from Broce Manufacturing Co., Norman, Okla., has a hydrostatic drive with a hot oil shuttle built into the drive motor for continuous oil flow back to the cooler. The hydrostatic pump and motor are coupled to a two-speed gearbox with a neutral shift for towing.
||Charter Software rental component
Booth No. 1770
The rental management component integrated into the ASPEN dealership management system from Charter Software, Littleton, Colo., allows dealers to manage depreciation within the ASPEN business system. Dealers also can use the system to track rental income by market segment, equipment and other configurable categories. An integrated customer relationship management (CRM) component provides users with the ability to send mass email, prepare and track quotes, and gain insight into sales trends without separate software.
|Point-of-Rental Systems module
Booth No. 3341
The optional shipping module from Point-of-Rental™ Systems, Grand Prairie, Texas, is designed to integrate shipping information from FedEX and UPS, so that users of the company’s software can check shipment information directly from the counter system and email customers the shipment information along with a link to check tracking.
Big Ass Fans floor fan
Booth No. 4561
The AirGo® mobile vertical floor fan from Big Ass Fans®, Lexington, Ky., has an 8-ft. diameter to handle air movement in tough environments, the company says. When air movement isn’t enough to cool an area, the company offers the AirGo misting kit, which provides a cloud of ultra-fine mist and can lower indoor or outdoor temperatures by up to 25 degrees Fahrenheit.
|MS Gregson, Div. of RAD Technologies weed killing system
Booth No. 1959
The Geyser ecological weed killing system from MS Gregson, Div. of RAD Technologies, Drummondville, Quebec, Canada, is designed to eradicate weeds with steam by using a pressure washer and hot water. The Geyser is mounted on industrial airless rubber tires with rear swivel ball bearing wheels. In weed-killing, low-pressure mode, the hot water in excess of 190 degrees Fahrenheit is delivered through a weed-killing barrel nozzle that can target undesirable vegetation from a distance of up to 18 in. The hot water melts the waxing coating of the leaves on the weeds to kill the weeds within
24 hours to two days. The unit also can
be used as a cold water or hot water pressure washer.
||Graco paint sprayers
Booth No. 2963
The RentalPro airless paint sprayer line from Graco, Rogers, Minn., includes two models, offering a maximum delivery rate of 0.54 gpm and maximum operating pressure of
3,300 psi. The 35-lb. RentalPro 210 has a heavy-duty frame and roll-cage design, and can fit in the trunk of a car, the company says. The 65-lb. RentalPro 230 has a single-handle, “Fold-N-Store” cart design and is powered by a 3/8-hp DC motor.